Alright I'm finally back and able to post a few pictures so here we go. First off is the picture of the damage right inside of trailer door.


Next shows what it looks like with the vinyl pulled back to expose the damage.


Then a picture of the area with vinyl cut away and exposing even more of the water damaged flooring. The wood is basically sawdust at this point and was just scooped out.



Next begins the removal of the dinette so that I can get to a larger portion of the flooring.



After the dinette was removed I nearly stepped through the floor under where the table was. This is getting worse then I thought. And sure enough it was. Notice in the picture how the vinyl is curling up and then a shot that shows the damage underneath.


I had no idea that the damage was quite as extensive as I was finding when I first looked at the trailer. The biggest problem being the particle board flooring just turns to sawdust when wet. It soaks up water like a sponge and then just goes to mush. Even in spots where its not mush you can tell it is buckeled from the water seepage. I have a feeling I'm going to be replacing alot more flooring than I first bargained for. Stick around and hopefully tomorrow I will post the pictures of the bathroom floor and subsequent removal.